MCP130 |
RFQ for MCP130 Required Field |
 |
| Technical/Catalog Information | MCP130-270DI/TO |
| Vendor | Microchip Technology |
| Category | Integrated Circuits (ICs) |
| Output | Open Drain or Open Collector |
| Reset | Active Low |
| Package / Case | TO-92-3 |
| Packaging | Bag |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150 ms Minimum |
| Type | Simple Reset/Power-On Reset |
| Voltage - Threshold | 2.7V |
| Operating Temperature | -40°C ~ 85°C |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MCP130 270DI TO MCP130270DITO |
| Product | Manufacturers | Pack | D/C | ||||||||||
| MCP130 | - | - | 08+ |
The Microchip Technology Inc. MCP120/130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. Both devices are available with a choice of seven different trip voltages and both have open drain outputs. The MCP130 has an internal 5 k pullup resistor. Both devices have active lowRESET pins. The MCP120/130 will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.
Features |
| • Holds microcontroller in reset until supply voltage reaches stable operating level• Resets microcontroller during power loss• Precision monitoring of 3V, 3.3V and 5V systems• 7 voltage trip points available• Active lowRESET pin• Open drain output• Internal pull-up resistor (5 k) for MCP130• HoldsRESET for 350 ms (typical)•RESET to VCC = 1.0V• Accuracy of ±125 mV for 5V systems and ±75 mV for 3V systems over temperature• 45 A typical operating current• Temperature range: - Industrial (I): -40°C to +85°C |
VDD..............................................................................7.0V
All inputs and outputs w.r.t. VSS ...........-0.6V to VDD +1.0V
Storage temperature ........................... -65°C to +150°C
Ambient temp. with power applied ...... -65°C to +125°C
ESD protection on all pins ...................................... 2 kV
*Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
